Starting during the production month/year of 03/2003 BMW redesigned the Automatic HVAC Climate Control in the E46 BMW 3 Series cabin. The new style 12 Button units are plug and play swappable with the older style 10 Button units and will replace the older units completely. If your 1998 to 03/2003 BMW E46 was bought secondhand and came with a new style unit this means that the original HVAC unit was replaced with a new style unit by the previous owner or if you find your 03/2003 on BMW E46. BMW e46 A/C heater Climate Control panel unit NEW warr. Make sure this fits by entering your model number. BMW part# 64 11 6 956 319, check fit below. Genuine BMW part, recently made: not been lying around. E46 climate control unit. Jump to Latest Follow 1 - 1 of 1 Posts. Y2k-E46 Registered. Joined Sep 10, 2004 55 Posts. Discussion Starter. #1. Jan 9.
- Bmw E46 Climate Control Unit Not Working
- E46 Climate Control Unit Diagram
- E46 Climate Control Units
- E46 Climate Control Unit Definition
- Bmw E46 Climate Control Unit
Details
- Decent product, feels nice to touch and a great way to help to update my old e46. Now I can charge my iPhone without having to plug in an extra adapter and it helped a lot with the appearance of the dash due to having to relocate my hvac control panel. Not super thick but flexible and sturdy enough to install.
- (5A) Engine control module(ECM), ignition coil relay. F30 (7,5A) Alternator, engine oil level sensor, data link connector (DLC)-16pin. F31 (5A) Tyre pressure monitor control module. F32 (5A)Headlamp switch, head lamp control module- LH(gas discharge headlamps),head lamp control module-RH(gas discharge headlamps) F33.
Part Number: 64116956319
Interchange, Fitment and Specification info:
BMW 3 Series 320i Sedan 2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series 323Ci Convertible1999, 2000, 2001
BMW 3 Series 323Ci Coupe1998, 1999, 2000, 2001
BMW 3 Series 323i Sedan 1997, 1998, 1999, 2000, 2001
BMW 3 Series 323i Wagon1998, 1999, 2000, 2001
BMW 3 Series 325Ci Convertible2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
BMW 3 Series 325Ci Coupe2000, 2001, 2002, 2003, 2004, 2005, 2006
BMW 3 Series 325i Sedan 2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series 325i Wagon2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series 325xi Sedan 2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series 325xi Wagon2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series 328Ci Coupe1998, 1999, 2000
BMW 3 Series 328i Sedan 1997, 1998, 1999, 2000
BMW 3 Series 330Ci Convertible1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
BMW 3 Series 330Ci Coupe1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
BMW 3 Series 330i Sedan 1999, 2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series 330xi Sedan 1999, 2000, 2001, 2002, 2003, 2004, 2005
BMW 3 Series M3 Convertible2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
BMW 3 Series M3 Coupe2000, 2001, 2002, 2003, 2004, 2005, 2006 - If you have question reguarding: fitment, availability, condition, delivery or any other question about this or any other part, please e-mail us: ' info@bmwallparts.com '
Additional Information
| Item Source History | From De-commissioned Vehicle |
|---|---|
| Brand | BMW |
| Location Code | W1R2S0C3 |
Note
is continuously shown on the display of the automatic climate control.
Manual air distribution
Press the button repeatedly to select a program:
▷ Upper body region.
▷ Upper body region and footwell.
▷ Footwell.
▷ Windows and footwell: driver's side only.
▷ Windows, upper body region and footwell:
driver's side only.
If the windows are fogged over, press the AUTO button on the driver's side to utilize the condensation sensor.
Temperature
Turn the wheel to set the desired temperature.
The automatic climate control achieves this temperature as quickly as possible, if necessary with the maximum cooling or heating capacity, and then keeps it constant.
Avoid rapidly switching between different temperature settings. The automatic climate control will not have sufficient time to adjust the set temperature.
AUTO program
Press the button.
Air volume, air distribution, and temperature are controlled automatically.
Depending on the selected temperature, AUTO intensity, and outside influences, the air is directed directed to the windshield, side windows, upper body, and into the footwell.
The cooling function, is switched on automatically with the AUTO program.
At the same time, a condensation sensor controls the program so as to prevent window condensation as much as possible.
Intensity of the AUTO program
With the AUTO program switched on, automatic control of the air volume and air distribution can be adjusted.
Press the left or right side of the button:
decrease or increase the intensity.
The selected intensity is shown on the display of the automatic climate control.
Air volume, manual
To be able to manually adjust the air volume, switch off the AUTO program first.
Press the left or right side of the button:
decrease or increase air volume.
The selected air volume is shown on the display of the automatic climate control.
The air volume of the automatic climate control may be reduced automatically to save battery power.
Defrosting windows and removing condensation
Press the button.
Ice and condensation are quickly removed from the windshield and the front side windows.
The air volume can be adjusted when the program is active.
If the windows are fogged over, additionally switch on the cooling function or press the AUTO button to utilize the condensation sensor.
Maximum cooling
Press the button.
The system is set to the lowest temperature, maximum air volume and recirculatedair mode.
Air flows out of the vents for the upper body region.
Open them for this purpose.
Bmw E46 Climate Control Unit Not Working
Air is cooled as quickly as possible:
▷ At an external temperature of approx. 32 ℉/ 0 ℃.
If the windows are fogged over, press the AUTO button on the driver's side to utilize the condensation sensor.
Temperature
Turn the wheel to set the desired temperature.
The automatic climate control achieves this temperature as quickly as possible, if necessary with the maximum cooling or heating capacity, and then keeps it constant.
Avoid rapidly switching between different temperature settings. The automatic climate control will not have sufficient time to adjust the set temperature.
AUTO program
Press the button.
Air volume, air distribution, and temperature are controlled automatically.
Depending on the selected temperature, AUTO intensity, and outside influences, the air is directed directed to the windshield, side windows, upper body, and into the footwell.
The cooling function, is switched on automatically with the AUTO program.
At the same time, a condensation sensor controls the program so as to prevent window condensation as much as possible.
Intensity of the AUTO program
With the AUTO program switched on, automatic control of the air volume and air distribution can be adjusted.
Press the left or right side of the button:
decrease or increase the intensity.
The selected intensity is shown on the display of the automatic climate control.
Air volume, manual
To be able to manually adjust the air volume, switch off the AUTO program first.
Press the left or right side of the button:
decrease or increase air volume.
The selected air volume is shown on the display of the automatic climate control.
The air volume of the automatic climate control may be reduced automatically to save battery power.
Defrosting windows and removing condensation
Press the button.
Ice and condensation are quickly removed from the windshield and the front side windows.
The air volume can be adjusted when the program is active.
If the windows are fogged over, additionally switch on the cooling function or press the AUTO button to utilize the condensation sensor.
Maximum cooling
Press the button.
The system is set to the lowest temperature, maximum air volume and recirculatedair mode.
Air flows out of the vents for the upper body region.
Open them for this purpose.
Bmw E46 Climate Control Unit Not Working
Air is cooled as quickly as possible:
▷ At an external temperature of approx. 32 ℉/ 0 ℃.
▷ When the engine is running.
The air volume can be adjusted when the program is active.
Automatic recirculated-air control/ recirculated-air mode
You can respond to unpleasant odors or pollutants in the immediate environment by temporarily suspending the supply of outside air. The system then recirculates the air currently within the vehicle.
Press the button repeatedly to select an operating mode:
▷ LEDs off: outside air flows in continuously.
▷ Left LED on, automatic recirculated-air control:
a sensor detects pollutants in the outside air and controls the shut-off automatically.
▷ Right LED on, recirculated-air mode: the supply of outside air into the vehicle is permanently blocked.
If the windows are fogged over, switch off the recirculated-air mode and press the AUTO button on the driver's side to utilize the condensation sensor. Make sure that air can flow onto the windshield. Ford tis 2004 dvd widescreen.
Continuous recirculated-air mode
The recirculated-air mode should not be used for an extended period of time, as the air quality inside the vehicle deteriorates steadily.◀
Cooling function
The passenger compartment can only be cooled with the engine running.
Press the button.
The air is cooled and dehumidified and – depending on the temperature setting – warmed again.
Depending on the weather, the windshield may fog up briefly when the engine is started.
The cooling function is switched on automatically with the AUTO program.
When using the automatic climate control, condensation water, develops that exits underneath the vehicle.
Rear window defroster
Press the button.
The rear window defroster switches off automatically after a certain period of time.
ALL program
Press the button.
The current settings on the driver's side for temperature, air volume, air distribution, and AUTO program are transferred to the front passenger side and to the left and right rear.
The program is switched off if the settings on the front passenger side or in the rear are changed.
Residual heat
The heat stored in the engine is used to heat the interior.
Functional requirement
▷ Up to 20 minutes after the engine has been switched off.
▷ Warm engine.
▷ The battery is sufficiently charged.
▷ External temperature below 77 ℉/25 ℃.
Switching on
1. Switch off the ignition.
2. Press the right side of the button on the driver's side.
is shown on the display of the automatic climate control.
The interior temperature, air volume and air distribution can be adjusted with the ignition switched on.
Switching off
At the lowest fan speed, press the left side of the button on the driver's side.
on the display of the automatic climate control goes out.
E46 Climate Control Unit Diagram
Switching the system on/off
Switching off
▷ Complete system:
At the lowest fan speed, press the left side of the button on the driver's side.
▷ On the front passenger side:
At the lowest fan speed, press the left side of the button on the front passenger side.
Switching on
Press any button.
Microfilter/activated-charcoal filter
E46 Climate Control Units
The microfilter removes dust and pollen from the incoming air.
The activated-charcoal filter removes gaseous pollutants from the outside air that enters the vehicle.
This combined filter should be replaced during scheduled maintenance, of your vehicle.
See also:Checking the engine oil level
Your car is equipped with an electronic engine oil level check. Requirements ▷ The engine must be running and warm after the vehicle has been driven for at least 6.2 miles/10 km. ▷ ..
E46 Climate Control Unit Definition
Power failure
After a temporary power loss, some equipment needs to be reinitialized. Individual settings need to be reprogrammed: ▷ Seat and mirror memory: store the positions again. ▷ Time: upd ..
Bmw E46 Climate Control Unit
Displaying, setting or changing the limit
1. 'Settings' 2. 'Speed' 3. 'Warning at:' Warning at 4. Turn the controller until the desired limit is displayed. 5. Press the controller. The speed limit is st ..
